R-CAS-V Spin-In Capsule with Threaded Rods

High-performance, quick-setting, styrene-free vinylester resin for concrete

Approved for use with threaded rods in non-cracked concrete (ETAG001 Option 7)
High performance for use safety critical application - heavy-duty fastenings with small spacing and edge distances
The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where close edge and spacing distances are required
Capsule contains precise amounts of ingredients making it a very consistent product
Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water
Suitable for dry or wet non-cracked concrete
Styrene free - odourless

Base material

Non-cracked concrete C20/25-C50/60

For use also with

Natural Stone

Applications

Threaded rods

Balustrading

Railings

Heavy machinery

Structural steel

Steel columns

Cladding restraints

Curtain walling

Fencing & gates manufacturing and installation

Formwork support systems

Garage doors

Guard rails

Installation guide

Drill hole to the required diameter and depth for socket size being used.
Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
Leave the anchor undisturbed unitl the curing time elapses.
Attach fixture and tighten the nut to the required torque.

Product Card Approvals and reports

BACK

Trust & Innovation