R-KEM II with Threaded Rods for Concrete
Universal polyester (styrene free) resin - European Approval for 15 substrates
Features and benefits
- The most convenient bonded anchor for general pupose use
- Quick, secure and simple installation
- Product with wide spectrum of use in the medium load capacity area
- Ideal for applications where mechanical anchors are not suitable
- Easy dosage thanks to patented self-opening system and use of manual or pneumatic gun
- Option of use standard manual silicone gun
- Suitable for multiple use. Partly used product can be reused after fitting new nozzle
Applications
- Consoles
- Canopies
- Handrails
- Staircases
- Sanitary appliances
- Ladders
- Gates
- Steel constructions
- Cable trays
- High racking
- Railings
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Solid substrates: clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation. Hollow substrates: insert mesh sleeve into the hole.
- Insert cartridge into gun and attach nozzle.
- Dispense to waste until even colour is obtained.
- Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth.
- Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
- Attach fixture and tighten the nut to the required torque.
Download
Product Card
Approvals and reports
