R-KEX II with Sockets
Premium pure epoxy resin approved for use with internally threaded sockets
Features and benefits
- Allows removal of bolt to leave a re-usable socket in place
- Approved for use with Sockets in non-cracked concrete (ETAG001 Option 7)
- Suitable for use in dry and wet substrates including under water
- Very high chemical resistance – suitable for applications exposed to influence of various agents (industrial or marine environment)
- Minimal shrinkage provides option of use in diamond-drilled holes and oversized holes
- Extended bonding time ensures easy installation of metal components (up to 30 min. in 20°C)
- For use in positive temperatures
- Suitable for use in dry and wet substrates including under water
Installation guide
- Drill hole to the required diameter and depth for socket size being used.
- Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
- Insert cartridge into gun and attach nozzle.
- Dispense to waste until even colour is obtained.
- Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth.
- Immediately insert the socket, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
- Attach fixture and tighten the bolt to the required torque.
Download
Product Card
Approvals and reports
