R-KEX II with Threaded Rods
Premium pure epoxy resin approved for use in cracked and non-cracked concrete
Features and benefits
- The strongest resin in the epoxy resin class
- Approved for use with threaded rods for use in cracked and non-cracked concrete (ETAG001 Option 1)
- Suitable for use in dry and wet substrates including under water
- Very high chemical resistance – suitable for applications exposed to influence of various agents (industrial or marine environment)
- Minimal shrinkage provides option of use in diamond-drilled holes and oversized holes
- Extended bonding time ensures easy installation of metal components (up to 30 min. in 20°C)
- For use in positive temperatures
Base material
- Cracked concrete C20/25-C50/60
- Non-cracked concrete C20/25-C50/60
Applications
- Safety barriers
- Formwork support systems
- Structural steelwork
- Street lamps
- Curtain walling
- Racking systems
- Balustrading
- Barriers
- Cladding restraints
- Masonry support
- Heavy machinery
- Platforms
Installation guide
- Drill hole to the required diameter and depth for stud size being used.
- Clean the hole with brush and hand pump at least four times each. It is very important and necessary before installation.
- Insert cartridge into gun and attach nozzle.
- Dispense to waste until even colour is obtained.
- Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth.
- Immediately insert the stud, slowly and with slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.
- Attach fixture and tighten the nut to the required torque.
Download
Product Card
Approvals and reports
