R-RBP Rawlbolt - Bolt Projecting for use in cracked and non-cracked concrete

World's most popular all-purpose expanding shield anchor - bolt projecting version

RAWLBOLT® - first ever mechanical anchor in the world, forerunner of all of the later mechanical anchors
For use in cracked and non-cracked concrete (ETA option 1), hollow-core slabs, flooring blocks and ceramics
Product recommended for applications requiring fire resistance
Three-pieces expanding sleeve of maximum expansion provides optimal load and safety of use in any substrate
Wide range of diameters (M6 to M24)

Base material

Cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Unreinforced concrete

Reinforced concrete

For use also with

Solid clay brick 20MPa

Hollow Sand-lime Brick 15MPa

Natural Stone

Hollow Lightweight Concrete Block

Hollow-core Slab

Concrete hollow floor block (eg. Teriva)

Applications

Roller shutter doors

Fire doors

Steelwork

Security grills

Heavy machinery

Pipework/duct work support

Installation guide

Drill a hole of required diameter and depth. Note: When fixing into brickwork, mortar joints should be avoided
Clear the hole of drilling dust and debris (using blowpump or equivalent method)
Remove nut and washer and insert anchor into hole. Tap home with hammer until flush with surface
Position fixture over the projecting bolt
Add washer and nut and tighten to recommended torque

Product Card Approvals and reports

BACK

Trust & Innovation